Schlüter®BEKOTECEN 23 F SchlüterSystems


Schlüter BEKOTECEN 23 F Estrichnoppenplatte 1,08 m² EN23F Franke Raumwert

Schlüter®-BEKOTEC-EN 23 F is de betrouwbare bekledingsconstructietechniek voor het realiseren van barstvr!e en juist functionerende dekvloeren en verwarmde dekvloeren met zeer dunne laagdiktes vanaf 31 mm. Naast tegels en natuursteen kunnen ook andere bekledingsmaterialen op de BEKOTEC-dekvloer worden aangebracht.


Schlüter®BEKOTECEN 23 F SchlüterSystems

Die Estrichnoppenplatte Schlüter-BEKOTEC-EN 23 F besteht aus einer druckstabilen Polystyrol-Tiefziehfolie und eignet sich für den Aufbau des Fußbodenheizsystems Schlüter-BEKO-THERM. Mit der Verwendung von Schlüter-BEKOTEC-EN 23 F können die Heizrohre Schlüter-BEKOTEC-THERM-HR mit einem Durchmesser von 14 mm aufgenommen werden.


Schlüter®BEKOTECEN 23 F SchlüterSystems

Schlüter®-BEKOTEC-EN 23 F, -ENFG, -BRS y BTS no se descomponen y no necesitan ningún mantenimiento o cuidado especial. Antes y durante la colocación del recrecido de mortero, se debe proteger adecuadamente la placa de polietileno con nódulos, para evitar daños por cargas mecánicas, p.ej., colocando tablas de madera.


Schlüter®BEKOTECEN 23 F SchlüterSystems

Schlüter-BEKOTEC-EN 23 F ist aus einer druckstabilen Polystyrol-Tiefziehfolie gefer-tigt und ist für die Verwendung von kon-ventionell eingebrachten Estrichen auf Zement- oder Calciumsuflatbasis sowie für Fließestrich geeignet. Schlüter®-BEKOTEC-F Belagskonstruktion Dünnschichtige Belagskonstruktion für Sanierungen und Neubau 9.2


Schlüter®BEKOTECEN 23 F SchlüterSystems

The system is based on the Schlüter-BEKOTEC-EN 23 F studded screed foil panel, which is installed directly on top of a load-bearing substrate and/or over conventional heat insulation and sound insulation panels. The geometry of the BEKOTEC-EN 23 F studded panel dictates a minimum screed layer thickness of 31 mm between and 8 mm above the studs.


Schlüter BEKOTECEN 23 F Estrichnoppenplatte 1,08 m² EN23F Franke Raumwert

Schlüter®-BEKOTEC-EN 23 F Schlüter®-BEKOTEC-F is a safe and especially thin cover assembly system for damage free and functionally safe floating screeds and heated screeds with ceramic tile or natural stone coverings. The Schlüter®-BEKOTEC screed is also suitable for other covering materials.


Schlüter®BEKOTECEN 23 F SchlüterSystems

Schluter®-BEKOTEC-F is a modular screed systems that produces permanent flooring assemblies that are free from internal stresses. The Schluter®-BEKOTEC-EN23F studded polystyrene screed panels that are placed directly over any load-bearing substrate and optional common sound and/or heat-insulating layers. The studs effectively divide the.


Schlüter®BEKOTECEN 23 F SchlüterSystems

Schlüter-BEKOTEC-EN is designed to accommodate BEKOTEC-THERM-HR heating pipes with a diameter of 16 mm. With an assembly height of 52-69 mm (plus DITRA uncoupling mat), it is the most insulating of our BEKOTEC studded screed panels and thus suitable for use in areas where thermal insulation is required (e.g. on foundation slabs).


Schlüter BEKOTECEN 23 F Estrichnoppenplatte 1,08 m² EN23F Franke Raumwert

10. Distributor area - adhere the studded screed panels Schlüter-BEKOTEC-EN 23 F to the levelling panel EN FG. 11. Distributor area - adhere the pipe clamping strips BTZRKL to arrange the pipes as needed. 12. Door area - pipe layout. If necessary, install the expansion joint profile Schlüter-DILEX-DFP (if there are sound insulation.


Schluter BEKOTECEN23F Studded Screed Panel Buy Online from Pro Tiler Tools

Schlüter®-BEKOTEC-EN 23 F - Polystyrol-Estrichnoppenfolienplatte für Heizrohr 14x2 mm. Dieses System basierend auf der Polystyrol-Estrichnoppenplatte Schlüter®-BEKOTEC-EN wird direkt auf den tragfähigen Untergrund oder über handelsübliche Wärme- und/oder Trittschalldämmmatten ausgelegt. Die Fußbodenheizung ist gut regulierbar und.


Schlüter BEKOTECEN 23 F Estrichnoppenplatte 1,08 m² EN23F Franke Raumwert

Schlüter-BEKOTEC-EN 23 F se pose sur un support plan et porteur. Les défauts de planéité du support doivent être compensés par un ragréage ou un ravoirage. Des isolants thermiques doivent être, si nécessaire, posés sur le support, conformément aux normes en vigueur. Si des câbles ou des canalisations sont posés sur le support, ils.


Schlüter®BEKOTECEN 23 F SchlüterSystems

Schlüter®-BEKOTEC-F is a modular system for crack free and functionally safe floating screeds and heated screed with coverings made of ceramic tiles, natural Stone or other materials. The system is based on the studded screed panel Schlüter®-BEKOTEC-EN 23 F, which is directly installed on top of load bearing substrates or conventional heat insulation and/or sound insulation panels.


schlüter bekotec en 23 f

foil panel Schlüter-BEKOTEC-EN 23 F, which is directly installed on top of a load bearing substrate and/or over conventional heat insulation and sound insulation panels. The geometry of the BEKOTEC-EN 23 F studded panel dictates a minimum screed layer thickness of 31 mm between and 8 mm above the studs. The stud spacing


Schlüter®BEKOTECEN 23 F SchlüterSystems

Dieses System basiert auf der Estrichnoppen-folienplatte Schlüter®-BEKOTEC-EN 23 F, die direkt auf den tragfähigen Untergrund oder über handelsübliche Wärme- und/ oder Trittschalldämplatten ausgelegt wird. Aus der Geometrie der Noppenplatte Schlüter®-BEKOTEC-EN 23 F ergibt sich eine Mindestschichtdicke des Estrichs von 31 mm zwischen.


Schlüter®BEKOTECEN 23 F SchlüterSystems

The geom-etry of the Schlüter®-BEKOTEC-EN 23 F studded panel results in a minimum screed thickness of 31 mm between the studs and. 8 mm above the studs. The studs form a grid pattern with a distance of 75 mm between them to accept 14 mm diameter heating pipes if a heated screed is to be installed. The floor heating system is easily adjustable.


Schlüter BEKOTECEN 23 F Estrichnoppenplatte 1,08 m² EN23F Franke Raumwert

Assembly with Schlüter®-BEKOTEC-EN 23 F and heating pipe 14 x 2 mm, see product data sheet 9.2. Assembly with Schlüter®-BEKOTEC-EN 18 FTS and heating pipe 12 x 1.5 mm (with inte-grated impact sound insulation; directly installed floating over load bearing sub-strates), see product data sheet 9.4. Assembly with Schlüter®-BEKOTEC-EN 12 FK